• Series 20 Standard Leak Testing Fixture
• Series 40 Standard Leak Testing Fixture
• Twin Station Series 40 Standard Leak Testing Fixture
• Series 40 Standard Leak Test Machine with Interchangeable Fixtures

• TQC Equipment
• 'Chilled Beam' Leak Test
• Fuel Rail Leak & Burst Testing
• Fuel Tank Leak Testing
• High Pressure Audit Leak Test and Datalogging System
• High Speed Leak Testing of Pipe Fittings
• Plastic Sump Pipe Leak Test & Inserter
• Leak Test, Flexible Facility
• Leak Test Facility for Water Valves
• Medical Device Leak Testing
• Medical Filter Leak Test Machine
• Medical Shower Head Leak Test Facility
• Small Medical Device Leak Test
• V6 Engine Leak Testing
• Vauxhall Leak Test Machine
• Water Submersal Leak Detection
• Weapon Leak Test

• Product Datasheets

• TQC Home Page
• Leak Test Machines
• Assembly Automation
• Test Machines
• Plastics Machines
• Engineering Design Services

medical filter leak test and hot mark facility

The machine was designed to 100% leak test 3 variants of plastic medical filters.

The leak test fixture contained interchangeable tooling designed to seal off 4 filters at a time.

The single Nolek leak test instrument individually tested each filter with failures receiving a hot stamp reject mark.

Machine throughput was 4 filters every 75 seconds

	Medical industry Nolek S9 Leak Test Instrument TQC Series 40 leak test technology Clean Room Environment Omron PLC & HMI Portable Leak Rate: 50mm3 / sec at 4 bar test pressure

If you are currently considering a medical grade or clean room specification leak test application, or ant production automation contact TQC to discuss your requirements.